Vagabond Tool Rack

I have finally finished my portable tool rack design.  It is a tool roll, rack and box, all in one.  Maybe not really a box, but then it may be better.  Read along, and you can be the judge.

Before I let the cat out of the bag and show you the vagabond tool rack,

let me [...]

April 27th, 2010 | Category: TEOTWAWKI, Tool Box, Tool Box, Tool Making | 7 comments

Multi-Functional Divider

I love multifunctional tools. Sadly, most of them don’t really work very well. Here is one that is a real gem.

The bottom divider is unmodified.  Works great, and it can hold a pencil.  The top one is modified by having one point ground down.   It will not measure quite as small a [...]

December 22nd, 2009 | Category: Hand Tools, Metalworking, Tool Making, Tools | 2 comments

What a Pencil Shave Can do!

I took about 20 minutes and tested what a pencil shave can do.

Sweet little tool, made with one of the cutters from a pencil sharpener.

Here, I am pushing it into some pine,

On the left is cut with the grain in pine stopped to show a curl or spill. On the right is cut against the [...]

July 29th, 2009 | Category: Hand Tools, Tool Making, Woodworking | Leave a comment

Pencil Shave

I have been wanting one of these for about three years.  I finally made one!

This was made from one of the cutters in an old broken pencil sharpener.  It was a bit dull so I sharpened the cutter using the ancient method of soaking it in vinegar.  Now it is nice and sharp.  A bit [...]

July 27th, 2009 | Category: Hand Tools, Sharpening, Tool Making | 8 comments

Radius Cutter/Scribe

Johnathan, recently posted on Woodnet his rendition of an inlay radius cutter.  The design is one that Steve Latta showed in an article on Fine Woodworking.   Lie-Nielsen sells one based on that design.

The tool is a very stable compass that can cut.  My current need is one to mark a radius in steel.  [...]

July 21st, 2009 | Category: Hand Tools, Metalworking, Tool Making, Tools | Leave a comment
 
  Older Entries »