|
This one is simple. A quick release bit epoxied into a wooden handle. Real inexpensive kit for making a screwdriver! The second one took a lot more work, as I had to deep bore a concentric hole. But it was a screwdriver before I put the handle on it, so the question remains, did […] This one has a 35 degree bed, the plane is attached by a bolt through the sole. Hock 1.5 inch blade. 13″ long, 1lb 14 oz. It is far from perfect, but it is a keeper, and very stable. I like a consistent tool. Schtoo had a really nice suggestion, so I […] This is a really easy project. Here is the 12 step program for squareness: Needed Parts: 1 block of wood, 1 ruler, 3″ or so of 1/2″ Brass Rod, two long screws. Needed Tools: A tap and bit to match the two screws. I used a 1/4-20, Something to cut wood and brass […] There are just too many Rabbet planes, so I had to make a squirrel plane! 😀 It was modeled loosely on the Clifton 400 plane my son got me for my birthday! The Clifton 400 is now my most expensive hand tool. The marking knife is also made with mesquite. Here are the mandatory […] Here is a photo of the Froe Mallet I made. Even though I have never used one, or used a froe, the motive for the design is obvious. A rough surface will absorb some of the womp, so you want a smooth hard wood surface. But you are going to be pounding on […] |
||
|
Copyright © 2024 Toolmaking Art - All Rights Reserved Powered by WordPress & Atahualpa |
||
A page Dedicated to My Writing
Recent Comments